HiFiFibre Optics

Emergency repair

Fibre down? Call 07833 247002

Cable strikes, damaged fibre and faults with no obvious cause. We find the break, fix it and prove the fix with test results.

Find it, fix it, prove it

  1. Locate

    We test with the OTDR and power meter to find where the fault is and what has failed.

  2. Repair

    We re-splice the fibre, replace the damaged section or swap the failed part.

  3. Prove

    We retest the link and hand you the results, so you know it is fixed.

How soon can you be here?Call us with the location and what has happened. We will tell you straight away how soon we can be on site.

Common faults

Cable strikes

A digger, drill or saw through a fibre cable on a building site or private land.

Damaged fibre

Crushed, kinked or contaminated fibre in chambers, ducts and joints.

No light

Dead links traced to the part that failed, such as a broken WDM or splitter.

Faulty headends

Damaged, mis-patched or badly dressed fibre in racks and cabinets put right.

High loss

Links that still work but perform badly, traced to the splice or connector at fault.

We repair privately owned fibre. If the cable belongs to Openreach, Virgin Media or another network operator, the damage has to be reported to them.

Fault finding and repair

Close view of a hand holding damaged, dirty fibres pulled from a chamber
Damaged fibre recovered for repair
Power meter reading no light at a patch panel
No light: tracing a broken WDM
Hand holding an OTDR showing a trace analysis beside an open tray
Testing a faulty fibre with the OTDR
Headend equipment with tangled patch fibres
Faulty headend

Ready to discuss your fibre project?

Call for anything urgent. For everything else, email the details and we will reply with availability and a price, usually the same day.

07833 247002info@hi-fibre.co.uk

Contact HiFi